Wireguard¶

Le VPN Kiss, utilisant les dernières règles de l'art, construit pour être audité & performant ! au revoir IPSec & OpenVPN !
Dans le Kernel Linux via DKMS pour l'instant (10/10/18) et en userspace écrit en GO (en cours de migration en Rust) sur les autres plateformes (*BSD, OpenWRT, Android, Windows).

Installation¶

https://www.wireguard.com/install/

Configuration¶

Serveur¶

umask 077
wg genkey > /etc/wireguard/private
wg genkey | tee /etc/wireguard/private | wg pubkey > /etc/wireguard/publickey
wg set wg0 private-key /etc/wireguard/private
ip link set wg0 up

cat << EOF > /etc/wireguard/wireguard.conf
[Interface]
ListenPort = 50000 
PrivateKey = `cat /etc/wireguard/private`

[Peer]
PublicKey = Va0X1zOpRc9471Aa3DEUUy7UkAv5aq5SojtIPqOSqwg=
AllowedIPs = 10.33.33.0/24
Endpoint = 185.233.100.19:50000
EOF

Client¶

umask 077
wg genkey | tee /etc/wireguard/private | wg pubkey > /etc/wireguard/publickey
wg set wg0 private-key /etc/wireguard/private
ip link add dev wg0 type wireguard
ip link set wg0 up

Config serveur (Hypnos)¶

#!/bin/bash

set -x -e

# Creating the wireguard interface
ip link add dev wg0 type wireguard

# Setting the IP on the wireguard interface
ip address add dev wg0 185.233.101.127/24

# Configuring the wireguard server
wg set wg0 listen-port 50000 private-key /etc/wireguard/private

# Starting up the wireguard interface
ip link set up dev wg0

# Add Client
wg set wg0 peer W/iRbRNZhftkcmkfS/pUNcyDJ1YHB0cBEDigzed6+B0= allowed-ips 185.233.101.126/32

# Create the static route for the client
ip route add 185.233.101.126/32 dev wg0 proto static

Config client¶

#!/bin/bash

set -e -x

# Creating the wireguard interface
ip link add dev wg0 type wireguard

# Setting the IP on the wireguard interface
ip address add dev wg0 185.233.101.126/24

# Configuring wireguard
wg set wg0 private-key ./private

# Starting up the wireguard interface
ip link set up dev wg0

# Connect to the server
wg set wg0 peer 'XRhI4WqBipwY21pxPZ9Q7EWkypnQCKKtJjqu2tUUTVo=' allowed-ips 0.0.0.0/0 endpoint 185.233.100.9:50000

1er test: sacha's Home (Fibre Bouygues) --> @Hypnos (VM Aquilenet)¶

root@hypnos:/etc/wireguard# iperf3 -s
-----------------------------------------------------------
Server listening on 5201
-----------------------------------------------------------
Accepted connection from 10.33.33.2, port 60038
[  5] local 10.33.33.1 port 5201 connected to 10.33.33.2 port 60040
[ ID] Interval           Transfer     Bandwidth
[  5]   0.00-1.00   sec  15.1 MBytes   127 Mbits/sec                  
[  5]   1.00-2.00   sec  19.9 MBytes   167 Mbits/sec                  
[  5]   2.00-3.00   sec  20.1 MBytes   169 Mbits/sec                  
[  5]   3.00-4.00   sec  20.1 MBytes   169 Mbits/sec                  
[  5]   4.00-5.00   sec  19.7 MBytes   166 Mbits/sec                  
[  5]   5.00-6.00   sec  20.0 MBytes   168 Mbits/sec                  
[  5]   6.00-7.00   sec  20.2 MBytes   169 Mbits/sec                  
[  5]   7.00-8.00   sec  20.2 MBytes   170 Mbits/sec                  
[  5]   8.00-9.00   sec  20.1 MBytes   169 Mbits/sec                  
[  5]   9.00-10.00  sec  20.2 MBytes   169 Mbits/sec                  
[  5]  10.00-10.03  sec   566 KBytes   165 Mbits/sec                  
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval           Transfer     Bandwidth
[  5]   0.00-10.03  sec  0.00 Bytes  0.00 bits/sec                  sender
[  5]   0.00-10.03  sec   196 MBytes   164 Mbits/sec                  receiver
-----------------------------------------------------------
Server listening on 5201
-----------------------------------------------------------

root@hypnos:/etc/wireguard# wg
interface: wg0
  public key: Va0X1zOpRc9471Aa3DEUUy7UkAv5aq5SojtIPqOSqwg=
  private key: (hidden)
  listening port: 50000

peer: VEfmgnq/aXPX3qBB7Q2fgxAawQdfUYZDRKEQSPC8tnA=
  endpoint: 5.51.0.155:3418
  allowed ips: 10.33.33.0/24
  latest handshake: 4 minutes, 30 seconds ago
  transfer: 208.75 MiB received, 6.68 MiB sent

InstallDebian sur Apu2¶

https://blog.pgeiser.com/posts/2017/04/installing-debian-stretch-on-a-machine-without-a-graphic-card/

aptitude install dhcpd tmux whois aptitude dnsutils curl htop resolvconf

#!/bin/bash
gw=`ip  route | awk '/default/ { print $3 }'`
sysctl -w net.ipv4.ip_forward=1
ip link add dev wg0 type wireguard
ip address add dev wg0 10.33.33.2/24
ip link set up dev wg0
ip route add 185.233.100.19/32 via $gw dev enp1s0
ip route del default
ip route add default dev wg0
wg setconf wg0 /etc/wireguard/wg0.conf

https://git.zx2c4.com/WireGuard/about/src/tools/man/wg-quick.8
https://git.zx2c4.com/WireGuard/about/src/tools/wg.8

https://vincent.bernat.ch/fr/blog/2018-vpn-wireguard-route