Configuration réseau Routeurs, Ubiquitis¶

http://wiki.openwrt.org/doc/recipes/routedclient

Réseaux :¶

Routeur1 (internet) 192.168.1.42 (TP-Link TL-WR1043ND)

<------>

Nanostation M5 192.168.1.120(accessPoint)(openwrt)

<------>

Nanostation M5 192.168.1.121(client)(openwrt)

<------>

Routeur2 192.168.3.1(openwrt)(Port WAN)

Détails :¶

Routeur1 : 192.168.1.42 - START IP : 100; END IP : 199¶

• Relié a internet

Nanostation M5 : 192.168.1.120 ( Openwrt )¶

• Network/Interfaces/Lan :
  
  IPv4 192.168.1.120
  
  DHCP Server : Disable

• Network/Wifi
  
  Wireless network is enabled
  
  ESSID : OpenWrt_Aquilenet
  
  Mode : Access Point (WDS)
  
  Network : lan
  
  Hide ESSID
  
  Activer Wireless Security ?; MAC-Filter ?

Nanostation M5 : 192.168.1.121 ( Openwrt )¶

• Network/Interfaces/Lan :
  
  IPv4 192.168.1.120
  
  DHCP Server : Disable

• Network/Wifi
  
  Wireless network is enabled
  
  ESSID : OpenWrt_Aquilenet
  
  Mode : Client (WDS)
  
  Network : lan
  
  Hide ESSID
  
  Activer Wireless Security ?; MAC-Filter ?

TP-link : 192.168.3.1 lan - 192.168.1.130 wan ( Openwrt )¶

• Network/Interfaces/Lan :
  
  IPv4 adress 192.168.3.1
  
  IPv4 gateway 192.168.1.130
  
  DHCP Server : Activate
  
  Start 50 Limit 100

• Network/Interfaces/Wan :
  
  "Switch protocol"
  
  IPv4 adress 192.168.1.130
  
  IPv4 netmask 255.255.255.0
  
  IPv4 gateway 192.168.1.42
  
  IPv4 broadcast 192.168.1.255
  
  Use custom DNS servers 192.168.1.42
  
  DHCP Server : Disable

• Network/Wifi
  
  Wireless network is enabled
  
  ESSID : OpenWrt
  
  Mode : Access Point
  
  Network : lan
  
  Activer Wireless Security