Librehosting » Historique » Révision 2
Révision 1 (sacha, 29/07/2018 22:43) → Révision 2/44 (sacha, 29/07/2018 22:59)
# Configuration of a Libre Hosting
aka IPSec between OPNSense and OpenBSD
## Who we are
Aquilenet is a non profit organisation since 2010 and a "do it yourself ISP", member of a Federation of similar ISP in France called [FFDN](https://www.ffdn.org). We are netneutrality builders, helping for more freedom and building networks using and participating Libre Software.
We provide xDSL, VPN and we hope soon Fiber accesses, and a lot of services for our members (mail, nextcloud, hosting, VPS...) and for others [searx](https://searx.aquilenet.fr), [Etherpad](https://pad.aquilenet.fr), [Pastebin](https://pastebin.aquilenet.fr), [Peertube](https://tube.aquilenet.fr), ...
## The need: create a Libre format hosting in our cool local called "la mezzanine".
To allow to our the members of our non-profit organisation to put the hawdware they want (like Nuc, Raspberry pi, tower, etc...) in our Libre hosting space called "la mezzanine" with a Public IPv4 and IPv6 from our [ASN](https://en.wikipedia.org/wiki/Autonomous_system_(Internet)), we need to announce our IPs from another place than our Datacenter.
## How we do
We have to tunnel all the network from the Libre Hosting to Internet and vice versa. We have tried first with OpenVPN but the userland application use to much ressources for needed bandwidth (200Mbps).
This IP range will be routed by IPSec to our ASN point of BGP anounce in our datacenter, then they will route them to the Libre Hosting.
From our Libre Hosting we have a OPNSense Firewall and in our datacenter 2 clustered OpenBSD.
Check this logical graphic:
- Cerbere1:
/etc/ipsec.conf
~~~
ike passive esp from any to 185.233.102.128/26 \
peer 92.154.99.130\
main group modp2048\
psk "01d8fb1bd7cd1a0318cadf21ee23b32bab4107af"
flow esp from any to 185.233.102.128/26 peer 92.154.99.130
flow esp from any to 2a0c:e300:12::/48 peer 92.154.99.130
~~~
chmod 500 /etc/ipsec.conf
Lancer le tunnel:
isakmpd -K
ipsecctl -f /etc/ipsec.conf
vérifier la conf
ipsecctl -sa
sh -c "echo S \> /var/run/isakmpd.fifo"
less /var/run/isakmpd.result
flux les règles ipsec:
ipsecctl -F
debug:
isakmpd -d -DA=70 -K
Ajout de la route:
route add 185.233.102.129/26 185.233.100.124
- Conf Cerbere11
 
### \\-\> Configuration1: Performances
- AES\_CBC\_256/HMAC\_SHA2\_512\_256/MODP\_8192
- Cerbere11
last pid: 45038; load averages: 0.27, 0.34, 0.31 up 0+00:56:47 19:07:15
49 processes: 1 running, 48 sleeping
CPU 0: 3.9% user, 0.0% nice, 0.8% system, 3.1% interrupt, 92.1% idle
CPU 1: 1.2% user, 0.0% nice, 0.0% system, 6.3% interrupt, 92.5% idle
CPU 2: 0.4% user, 0.0% nice, 0.0% system, 21.3% interrupt, 78.3% idle
CPU 3: 5.9% user, 0.0% nice, 0.0% system, 2.4% interrupt, 91.7% idle
Mem: 109M Active, 145M Inact, 387M Wired, 152M Buf, 7214M Free
- Cerbere1
load averages: 1.18, 0.95, 0.74 cerbere1.aquilenet.fr 19:08:23
43 processes: 1 starting, 40 idle, 1 dead, 1 on processor up 3 days, 18:40 up 3 days, 19:21
CPU0 states: 0.2% user, 0.0% nice, 2.8% system, 7.4% interrupt, 89.6% idle
CPU1 states: 0.0% user, 0.0% nice, 22.4% system, 0.0% interrupt, 77.6% idle
CPU2 states: 0.0% user, 0.0% nice, 20.2% system, 0.0% interrupt, 79.8% idle
CPU3 states: 0.0% user, 0.0% nice, 10.8% system, 0.0% interrupt, 89.2% idle
Memory: Real: 584M/2111M act/tot Free: 5793M Cache: 754M Swap: 0K/8405M
- bande passante
### MTU
Linux: ping -M do -s 1172 185.233.102.130 =\> OK
Linux: iperf3 -c 185.233.102.130 -M 1160 =\> OK
Linux: ping -M do -s 1173 185.233.102.130 =\> NOK
Linux: iperf3 -c 185.233.102.130 -M 1161 =\> NOK
- netcat qui fait un echo
socat TCP4-LISTEN:4444,fork EXEC:cat